Ynode Version 0130 is RELEASED
Ynode Version 0130 is RELEASED
Dear Experts,
It has been so long that i could not have any time to enhance my engine.
I was constantly planning to add LazySmp. And finally, nowadays, i found some free time for the addition.
Now, the version “0130” supports LazySmp on 4 cores and according to my testings it is +100-120 ELO points better than previos version, that makes estimated ELO in 2950 - 3000 range.
I highly appreciate your testing whenever you are available.
Link : https://github.com/OrhanOzturk77/Ynode
Thank you in advance.
All the best.
It has been so long that i could not have any time to enhance my engine.
I was constantly planning to add LazySmp. And finally, nowadays, i found some free time for the addition.
Now, the version “0130” supports LazySmp on 4 cores and according to my testings it is +100-120 ELO points better than previos version, that makes estimated ELO in 2950 - 3000 range.
I highly appreciate your testing whenever you are available.
Link : https://github.com/OrhanOzturk77/Ynode
Thank you in advance.
All the best.
- Graham Banks
- Posts: 27029
- Joined: Sun Dec 18, 2005 5:47 pm
- Sign-up code: 0
- Location: Auckland, NZ
Re: Ynode Version 0130 is RELEASED
Is it possible for you to put all of the files that are necessary to run Ynode, into one folder for download?
Re: Ynode Version 0130 is RELEASED
Hi Graham,
Thank you for your prompt answer.
Either
You can click Green "Code" button on the link https://github.com/OrhanOzturk77/Ynode
Or
You can directly click the link https://github.com/OrhanOzturk77/Ynode/ ... s/main.zip
Regards.
Thank you for your prompt answer.
Either
You can click Green "Code" button on the link https://github.com/OrhanOzturk77/Ynode
Or
You can directly click the link https://github.com/OrhanOzturk77/Ynode/ ... s/main.zip
Regards.
- Graham Banks
- Posts: 27029
- Joined: Sun Dec 18, 2005 5:47 pm
- Sign-up code: 0
- Location: Auckland, NZ
Re: Ynode Version 0130 is RELEASED
Thanks.OOZTURK wrote: ↑Fri Oct 13, 2023 10:12 pm Hi Graham,
Thank you for your prompt answer.
Either
You can click Green "Code" button on the link https://github.com/OrhanOzturk77/Ynode
Or
You can directly click the link https://github.com/OrhanOzturk77/Ynode/ ... s/main.zip
Regards.
- Graham Banks
- Posts: 27029
- Joined: Sun Dec 18, 2005 5:47 pm
- Sign-up code: 0
- Location: Auckland, NZ
Re: Ynode Version 0130 is RELEASED
I can't figure out how to run this engine.
Doubleclicking on the exe won't open it.
Doubleclicking on the exe won't open it.
- Gabor Szots
- Posts: 12900
- Joined: Sat Dec 09, 2006 6:30 am
- Sign-up code: 10159
- Location: Szentendre, Hungary
Re: Ynode Version 0130 is RELEASED
I have found out what to do. You have to install this dotnet version: https://dotnet.microsoft.com/en-us/down ... -installer
I tried the latest dotnet version (v7.0) as well but that was not successful. Version 3 is what you'll want.
I tried the latest dotnet version (v7.0) as well but that was not successful. Version 3 is what you'll want.
- Graham Banks
- Posts: 27029
- Joined: Sun Dec 18, 2005 5:47 pm
- Sign-up code: 0
- Location: Auckland, NZ
Re: Ynode Version 0130 is RELEASED
Gabor Szots wrote: ↑Sun Oct 15, 2023 1:33 pm I have found out what to do. You have to install this dotnet version: https://dotnet.microsoft.com/en-us/down ... -installer
I tried the latest dotnet version (v7.0) as well but that was not successful. Version 3 is what you'll want.
Re: Ynode Version 0130 is RELEASED
Hello Graham,
Is everything OK ?
Could you run the EXE ? (It requires .Net Core 3.0 Framework)
If you want,i can rebuild the EXE for the .NET version that you already have.
Simply give me a green signal for it please.
Thank you.
Is everything OK ?
Could you run the EXE ? (It requires .Net Core 3.0 Framework)
If you want,i can rebuild the EXE for the .NET version that you already have.
Simply give me a green signal for it please.
Thank you.
- Graham Banks
- Posts: 27029
- Joined: Sun Dec 18, 2005 5:47 pm
- Sign-up code: 0
- Location: Auckland, NZ
Re: Ynode Version 0130 is RELEASED
I have the latest .net framework installed, so if you could provide an exe for that, I'd really appreciate it.
Re: Ynode Version 0130 is RELEASED
Could you please tell me exactly which .NET framework version you have installed ?
Thank you.
Thank you.
- Graham Banks
- Posts: 27029
- Joined: Sun Dec 18, 2005 5:47 pm
- Sign-up code: 0
- Location: Auckland, NZ
Re: Ynode Version 0130 is RELEASED
Hello Graham,
You can find the version compiled for .NET7 framework below.
https://github.com/OrhanOzturk77/Ynode/ ... E_0130.zip
Thank you.
You can find the version compiled for .NET7 framework below.
https://github.com/OrhanOzturk77/Ynode/ ... E_0130.zip
Thank you.
Re: Ynode Version 0130 is RELEASED
That opens and responds to the UCI command on my .NET7 machine here. The previous version didn't, as Graham found.OOZTURK wrote: ↑Mon Oct 16, 2023 4:39 pm Hello Graham,
You can find the version compiled for .NET7 framework below.
https://github.com/OrhanOzturk77/Ynode/ ... E_0130.zip
Thank you.
Re: Ynode Version 0130 is RELEASED
Thank you for the prompt reply Ray.
Please feel free to ask me anything if you need.
Thank you again.
Please feel free to ask me anything if you need.
Thank you again.
- Gabor Szots
- Posts: 12900
- Joined: Sat Dec 09, 2006 6:30 am
- Sign-up code: 10159
- Location: Szentendre, Hungary
Re: Ynode Version 0130 is RELEASED
Maybe you could mention with the release which .NET version is required. It could save the investigation work by the users.
- Graham Banks
- Posts: 27029
- Joined: Sun Dec 18, 2005 5:47 pm
- Sign-up code: 0
- Location: Auckland, NZ
Re: Ynode Version 0130 is RELEASED
Thanks. I'll try it now, and assuming it's fine, it will replace Mess in Division 8.OOZTURK wrote: ↑Mon Oct 16, 2023 4:39 pm Hello Graham,
You can find the version compiled for .NET7 framework below.
https://github.com/OrhanOzturk77/Ynode/ ... E_0130.zip
Thank you.
https://ccrl.live/16073
- Gabor Szots
- Posts: 12900
- Joined: Sat Dec 09, 2006 6:30 am
- Sign-up code: 10159
- Location: Szentendre, Hungary
Re: Ynode Version 0130 is RELEASED
I have started a tournament with version 0130. I set 256 MB for hash tables but the engine has a memory usage of almost 1 GB. Why is that?
Re: Ynode Version 0130 is RELEASED
Hi Graham,
I need to check.
This can be something related the latest NET framework that i recently upgraded to.
This can also hit the engine in negative way, if it causes paging/swapping.
I will check it.
Thank you informing me.
I need to check.
This can be something related the latest NET framework that i recently upgraded to.
This can also hit the engine in negative way, if it causes paging/swapping.
I will check it.
Thank you informing me.
- Gabor Szots
- Posts: 12900
- Joined: Sat Dec 09, 2006 6:30 am
- Sign-up code: 10159
- Location: Szentendre, Hungary
Re: Ynode Version 0130 is RELEASED
Hello Orhan,
I think you have mistaken me for Graham, I am Gabor.
I have installed both .NET3 and .NET7 so I could try both versions. There is no difference in the amount of memory used.
Re: Ynode Version 0130 is RELEASED
Sorry Gabor. Seemingly i am getting older
I will do the same analysis as well.
All the best.
I will do the same analysis as well.
All the best.
Re: Ynode Version 0130 is RELEASED
Hi Gabor,
Thank you pointing out this memory problem. It was mainly caused by framework and hitting also engine's performance.
I fixed it.
I will publish a new version soon.
All the best.
Thank you pointing out this memory problem. It was mainly caused by framework and hitting also engine's performance.
I fixed it.
I will publish a new version soon.
All the best.